Sanyo PLC-XTC50L Owner's Manual page 12

Part Names and Functions
Side Terminal
USB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with the supplied USB cable (p.20).
R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
VIDEO INPUT JACK
Connect the composite video output signal from
video equipment to this jack (p.21).
CONTROL PORT CONNECTOR
When controlling the projector from a computer,
connect the computer to this connector with a
control cable.
12
Downloaded From projector-manual.com Sanyo Manuals