Portable "Quadraport" Control Panel; To Operate "Quadraport" Attached; To Operate "Quadraport" At Remote Location - Craftsman 919.166700 Operator's Manual

Permanently lubricated two-stage twin-v portable air compressor
Table of Contents

Advertisement

Available languages

Available languages

Portable "Quadraport" Control Panel

The "Quadraport" allows remote air regulation and
control closer to the work area.
Operates
attached...

To operate "Quadraport" attached:

1. Attach 3/8" hoses (A) with 1/4" industrial quick-
connect fittings (B) to the outlets (C). One to
four tools can be used at the same time.
Always use pipe sealant tape when connecting
hoses or fittings to prevent air leaks.
To operate "Quadraport" at a remote location:
MAY CONTAIN 175 PSI OF AIR PRESSURE.
NEVER CONNECT ACCESSORIES TO UNREGU-
LATED AIR. NEVER OPERATE TOOLS OR
ACCESSORIES ABOVE MARKED MAXIMUM
PRESSURE.
removing or connecting "quadraport" and when
connecting hose to tank quick-connect coupler.
1. Hold "quadraport" and pull quick-connect cou-
pler (D) back to release and remove as shown.
D
or at a
remote location
Note
B
C
A
CAN CAUSE SERIOUS
INJURY OR DEATH. TANK
Reduce air pressure in tank
to 60 psi maximum before
F
E
D
G
2. Attach one end of a 1/2" hose (E) with 3/8"
quick-connect back flow safety check valve
(F)
(provided in kit) as shown. Make sure quick-
connect coupler is secure.
safety check valve included with unit to
connect "quadraport" to hose for use at a
remote location. If replacement back flow
safety check valve is needed refer to the
Parts Manual.
Always use pipe sealant tape when
connecting hoses or fittings to prevent air
leaks.
3. Attach the other end of the 1/2" hose (E) with
3/8" universal quick connect body (G) to the
"quadraport" as shown. NOTE: As shown below
to assemble 3/8" universal quick connect
body
to hose.
3/8" Universal
quick connect body
3/8" Universal
quick connect body
4. Attach 3/8" hoses
(A) with 1/4"
industrial quick-
connect plugs (B)
to the outlets
(C).
One to
four tools
can
be used at
the
same time.
5. The "quadra-
port" can be
temporarily or
permanently
mounted at
the work site using
the three
mounting
11 - ENG
To prevent possible injury,
ALWAYS use back flow
Note
Hose
Connector
OR
Hose
C
F
B
A
D23012

Advertisement

Chapters

Table of Contents
loading

Table of Contents