Table of Contents
Advertisement
SYMPTOM
Safety valve leaks a small
amount of steam when
the kettle is operating.
Kettle is hard to tilt.
16
OM-KLT-E
WHO
User
a. For contamination that prevents seating of valve. With full
pressure
in the jacket, pull the lever all the way briefly to blow the valve
clean, then let the lever snap back to seat the valve.
Authorized
a. Safety valve for defects. Replace any defective valve with an
Service Rep Only
identical valve. X
User
a. For air in the jacket. See "Jacket Vacuum" in the "Maintenance"
section of this manual.
Authorized
a. Tilting gear and worm for contamination and for proper alignment
Service Rep Only
and lubrication. X
Troubleshooting
WHAT TO CHECK
Advertisement
Table of Contents
