Table of Contents
Advertisement
Setting White Balance <WHITE BALANCE>
With its default Auto-Tracing White Balance (ATW) setting, this unit is able to obtain natural colors even when the light source
is changed. However, you may manually change the white balance settings or its mode to obtain better tone, especially when
the screen color does not match actual objects.
1
Select <WHITE BALANCE> and specify a mode.
SYNC
BLC
IRIS
·WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
·WHITE
PRESET
MENU
BALANCE
2
For advanced settings (AWC or MWB), press the
SET button.
REach corresponding settings screen will appear.
• Advance to next page when selecting "AWC".
Advance to page 18 when selecting "MWB".
3
Set <MENU> to "END" and press the SET button.
RCloses the settings screen and returns to the normal monitoring
screen.
INT
OFF
SET
y
ATW
NORM
0.45
60
HIGH
AUTO y
SET
y
OFF
END
■ ATW (Auto-Tracing White Balance)
Automatic setting for white balance.
■ AWC (One-Push Adjustment): (see next page)
Adjusts white balance by shooting white paper or wall.
■ 3200 (Halogen light or incandescent lamp, etc. )
(Fixed)
Targeted at around 3200 K of color temperature.
■ 5600 (Daytime sunlight) (Fixed)
Targeted at around 5600 K of color temperature.
■ FLUO (Fluorescent lamp) (Fixed)
Targeted at around 4200 K of color temperature.
■ MWB (Manual White Balance): (see page 18)
Fine-adjusts red and blue manually.
For accessing the main menu, see pages 5 – 7.
16
Advertisement
Table of Contents
