Use: Status And Alarm Indications; Charger On; Normal Operation - GE Digital Energy User Manual

3.3 Use: Status and Alarm Indications

the operating mode
! low priority alarms
!! high priority alarms
SITUATION

Charger on

Mains on.
O
(3.3.1) UPS output off
Normal
Mains on.
O operation
UPS output on
(3.3.2)
On battery Mains off or abnormal, UPS
!
(3.3.3) output on
Battery low UPS on battery, battery
!!
(3.3.4) under drained condition
Mains on, UPS output on.
Replace
! UPS has failed to pass the
battery (3.3.5)
previous self test
Overload on Mains on, output power >
!!
mains (3.3.6) 105% of the rated capacity.
Mains off or abnormal,
Overload on
!! Output power > 105% of the
battery (3.3.6)
rated capacity.
Mains on, unit switches to
Self test
O battery mode for 6 secs to
(3.3.7)
check the bat. condition
Operating modes and corresponding indications, see 3.3.1 – 3.3.7.
* Reset Buzzer alarm: Press keypad 'ON' for 2 seconds.
Only the actual buzzer is muted; a next alarm re-activates the buzzer.
A buzzer reset does not affect the computer interface alarm.
3.3.1 Charger on
Mains on, UPS output off, the batteries are charging.

3.3.2 Normal operation

Mains on, UPS output on, see also 3.2.1.
modifications reserved
o status indications
abnormal operating situations
situations in which the actual output voltage of the UPS is no longer
guaranteed; immediate action should be taken
Green blinking
1x /sec
Green on
Green on
(mains mode)
Green blinking
1x /sec
(standby mode)
Green on
Green on
6
LINE BAT
Red on
Red on
Red
blinking
1x /30 sec
Red on
Red on
User manual ML Series 350-1000 VA UPS 1.0 (GB)
RESET
BUZZER
BUZZER
Beeps
Possible*
1x /4 sec
Beeps Not
1x /sec possible
Beeps
1x /30 sec
Not
Continuous
possible
Not
Continuous
possible