HIKVISION DS-8104 Quick Operation Manual page 8

DS-8100-ST Series DVR Quick Operation Guide
character in front of the cursor. On checkbox fields, pressing the EDIT/IRIS+ button will tick the checkbox.
In Playback mode, it can be used to generate video clips for backup.
•
6MNO/PLAY: The 6MNO/PLAY button works as numeric [6] and letter [MNO]. It is used to enter the
Playback menu. It is also used to turn audio on/off in the Playback menu.
•
7PQRS/REC: The 7PQRS/REC button works as numeric [7] and letter [PQRS]. It is also used to enter the
Manual Record interface.
•
8TUV/PTZ: The 8TUV/PTZ button works as numeric [8] and letter [TUV]. It is also used to enter the
PTZ Control mode.
•
9WXYZ/PREV: The 9WXYZ/PREVIEW button works as numeric [9] and letter [WXYZ]. It is also used
to switch between single screen and multi-screen mode.
•
0/A: The 0/A button works as numeric [0]. It is also used to switch between input methods (upper and
lowercase alphabet, symbols and numeric input). It can also be used to clear entire masked areas, such as in
the Motion Detection and Privacy Mask menus.
•
SHIFT: The SHIFT button is used for switch button action between numeric button and control button.
4. DIRECTION/ENTER Buttons:
•
DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items
in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video.
The Left and Right button will jump 30s backward and forward in a video. In Preview mode, these buttons
can be used to cycle through channels.
•
ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can also be
used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In Single Play
mode, pressing the ENTER button will advance the video by a single frame.
5. POWER Button: The POWER button is used for power on or power off the DVR.
6. USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard
Disk Drive (HDD).
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text
field before you're able to edit its content. After you're done entering text, you must hit the ENTER button to be
able to move on to the next field.
7