HIKVISION DS-8104 Quick Operation Manual page 10

DS-8100-ST Series DVR Quick Operation Guide
DS-8108/8116HCI-ST Rear Panel
Note:
DS-8108HCI-ST provides 8 video inputs and 8 audio inputs on rear panel.
No. Item
VIDEO IN
1
AUDIO IN
2 SPOT VIDEO OUT
VIDEO OUT
3
AUDIO OUT
4 LINE IN
5 VGA
6 RS-232
7 LAN Interface
8 USB Interface
9 eSATA Interface
10 Termination Switch
RS-485 Interface
Controller port
11
ALARM IN
ALARM OUT
12 GROUND
13 POWER
Description
BNC connectors for analog video input.
BNC connectors for analog audio input.
BNC connector for monitor. Single-window view.
BNC connector for video output. If VGA is connected when the device is started
up, this interface will be used as the Aux video output with live view and pop-up
alarm picture operations. If VGA is not connected, this interface will be used as
the main video output with local video display and menu operations.
BNC connector for audio output. This connector is synchronized with VIDEO
OUT.
BNC connector for audio input.
VGA output. Display local video output and menu. If VGA is connected when the
device is started up, the VIDEO OUT interface will be used as the Aux video
output with live view and pop-up alarm picture operations. If VGA is not
connected, the VIDEO OUT interface will be used as the main video output with
local video display and menu operations.
DB9 connector for connection to RS-232 devices.
Connector for LAN (Local Area Network).
Connector for USB devices.
eSATA interface for storage and backup
RS-485 termination switch. ON: not terminated; OFF: connect with
termination.
Connectors for RS-485 devices. T+, T- pin connects to PTZ.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first
DVR's D+, D- pin should be connected with the D+, D- pin of the next DVR.
Connector for alarm input.
Connector for alarm output.
Ground(needs to be connected when DVR starts up)
100~240VAC power supply
9