HIKVISION DS-8104 Quick Operation Manual page 19

DS-8100HCI-ST Series DVR Quick Operation Guide
4. Click the Next button. This will take you to the General Settings dialog box.
5. Click the Enter button to enter the General Settings interface.
6. Select the language, output standard, VGA resolution and time zone here. If you do not need to input password
whenever you enter the menu, you can disable password.
7. Enter the correct date and time under System Time. Click the Apply button to save the setting.
8. Select the DST Settings tab to enable DST, and More Settings to change device name and number.
9. Click OK to return to the Setup Wizard window.
10. Click Next button to enter the HDD Management dialog box.
11. To access HDD management interface, click the Enter button.
12. If a new HDD has been recently installed, select the HDD from the list to initialize it. Initializing the HDD will
format and remove all data from it.
13. After the HDD has been initialized, click the OK button which will take you back to the Setup Wizard
window.
14. Click Next button to enter the Record Settings dialog box.
18