Thermostat Control - Pelonis NT20-12D Owner's Manual

OPERATING INSTRUCTIONS
IMPORTANT!
Your heater is equipped with a
polarized alternating current line plug
(a plug having one blade wider than
the other). This plug will fit into the
power outlet only one way. This is a
safety feature. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug still fails
to fit, contact your electrician to
replace your outlet. DO NOT defeat
the safety purpose of the polarized
plug.
A Power and Setting Control
B

Thermostat Control

• Place the heater on a firm level surface free from obstructions, and at least 3 ft. (0.9 m) away
from any wall and any other objects such as furniture, curtains, plants or combustible material.
• Plug into a grounded 120V, 60Hz outlet.
• Your heater is equipped with a 3-position power switch:
Symbol
OFF The heater turns off.
The fan circulates room air only.The heating elements are off.
FAN
LO The heater operates at 900 watts.
HI
The heater operates at 1500 watts.
• Set the power switch to maximum (HI) for fast warm-up of a room. Once the room
temperature is comfortable, select a lower setting to save electrical consumption and to
prevent the room from becoming too warm.
• Adjust the thermostat to maximum and select the desired power setting. Once the
room temperature is comfortable, rotate the thermostat counterclockwise till the heater
shuts off. The thermostat will now maintain the temperature by cycling the heater on or
off. During particularly cold weather, the low power setting may be insufficient to satisfy
the thermostat. Select a higher setting for these periods.
B
C
Control Panel Functions
Function
2
C Power Indicator Light
A