Using The Remote Control - Pelonis NY1507-14A Owner's Manual

Digital oil filled heater
Table of Contents

Advertisement

Timer will be canceled if you press the TIMER button when it is set to the
maximum hour.

USING THE REMOTE CONTROL

There are 5 keys that have the following functions:
1.
Press this key to select the heat setting.
2.
Temperature increase
3.
Temperature decrease
4.
Press to switch the heater on, press again to switch off
5.
Press this key repeatedly to set the timer
CAUTION : Please dispose or recycle the battery according to
municipal or provincial laws.
BATTERIES INSTRUCTIONS (not included)
1. Press down on the battery compartment cover
and slide it out.
2. Insert the batteries, making sure that the positive
terminals are facing the proper way.
3. Close the cover by sliding it.
Notes: 1) Use 2 "AAA" batteries (NOT INCLUDED).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon-line) or
rechargeable (nickel-cadmium) batteries.
4) Remove the batteries from remote if it is to be
left unused for a long period of time.
5) This product contains no battery
SAFTEY FEATURES
The heater is equipped with an over-heat device which cause the unit to stop
operating in the event that the internal temperature exceeds the normal operating
temperature.
If the heater shuts down,
1. Turn off and unplug the heater.
2. Wait for at least 10 minutes until the heater cools.
3. Plug the heater into the power outlet and then turn it on.
Note: This heater includes a safety tip-over protection feature which will shut the
heater off in case it is tipped over. If, at any time, the heater does tip over, please
put the heater back in the upright position (wheels on bottom, controls on top).
The heater will resume its normal operation.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents