Advertisement
Special Note: This heater is provided with a safe feature to de-energize the power of
heater when over-heating because of any abnormal operation. When it occurs, unplug the
heater and check the abnormal conditions and eliminate them before attempting to use it.
After cooling down, it may be energized for reuse.
USING THE REMOTE CONTROL
Instructions for remote control button function are basically consistent
with the operation panel of the body, and the remote-control unit cannot control
the combination key.
ON/OFF button
Mode button
BATTERIES INSTRUCTIONS (included)
1. Please push locking latch in the direction of Arrow A, and pull out the pull notch in the
direction of Arrow B at the same time.
2. Use 1 "CR2032" lithium battery (included)
3. Insert the batteries, making sure that the positive terminals are facing the proper way.
4. Replace the cover.
Temperature / Timer increase
Temperature / Timer decrease
Timer button
Battery installation
Battery installation
Pull Notch
Pull Notch
B
Locking
Locking
latch
latch
A
B
5
Advertisement
