Related Manuals for Pelonis NY1507-14A
Summary of Contents for Pelonis NY1507-14A
- Page 1 145x210mm 颜色：K MHT3537 NY1507-14A 说明书 381 20150513 OWNER’S MANUAL Digital Oil filled Heater MODEL: NY1507-14A PLEASE READ AND SAVE THESE INSTRUCTIONS...
- Page 2 PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2.
- Page 3 15. This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working. 16. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug.
-
Page 4: Operation
OPERATION : Temperature decrease : ON/OFF button : Temperature increase : Timer button : Mode button Control Panel Functions Timer Display Temperature Display Mode Display Function Button Caution Indicator Light 1. Check that neither the appliance nor the power cable has been damaged in any way during transportation when first using the heater. - Page 5 ECO The heater is automatically select the working setting(HI/LO) to maintain the desired temperature. 65 °F-85 °F The heater will automatically set the temperature to default mode (85 °F), If the temperature is not set within 2 minutes when you first turning on the heater. The unit will select the operating mode based on the following 2 conditions: a.
-
Page 6: Using The Remote Control
Timer will be canceled if you press the TIMER button when it is set to the maximum hour. USING THE REMOTE CONTROL There are 5 keys that have the following functions: Press this key to select the heat setting. Temperature increase Temperature decrease Press to switch the heater on, press again to switch off Press this key repeatedly to set the timer... -
Page 7: Care And Cleaning
CARE AND CLEANING 1. Always remove the plug from the power socket and allow heater to cool. Wipe heater with a soft, damp cloth. Do not use detergents and abrasives. 2. If the heater is not in use over a certain length of time, wind the cable around the holder and store it in a dry place. -
Page 8: Service And Support
SERVICE & SUPPORT In the event of a warranty claim or if service is required for this heater, please contact us at th following: Toll Free: 1-866-646-4332 Email us at: customersupport@mideaamericacorp.com For questions or comments, please write to: Midea America Corporation Customer Care Center 11800 NW100th Rd. -
Page 9: One (1) Year Limited Warranty
In the event of malfunctions or failure of your Pelonis Product, simply deliver or send the heater, postage prepaid along with PROOF OF PURCHASE , within the warranty period of one (1) year, to PELONIS.PELONIS reserves the right to inspect the claimed defective part or parts to determine...
Need help?
Do you have a question about the NY1507-14A and is the answer not in the manual?
Questions and answers
The Red Temperature light is flashing but the heater is still hot
When the red temperature light is flashing on a Pelonis NY1507-14A heater while it is still hot, it means the room temperature has reached the set temperature, so the heating element has stopped. The heater will resume heating when the room temperature drops below the set temperature.
This answer is automatically generated
@Mr. Anderson Thanks for answering that in all the years I have owned it I guess I never walked in the room and saw that happening!