Adjusting The Castor Wheels - Frank PYTHON C 048666 Operating Instructions Manual

Operating instructions
Parquet floor sander Python C 3,2kW/50Hz
with gentle lifting lever
6. Adjust the right running wheel to the position of the left running wheel using the running
wheel adjustment device. To accomplish this, turn the axle of the right running wheel with the
hexagon socket screw key until the right running wheel slightly touches the tongue of the
running wheel adjustment device.
7. Tighten the cam fixation screw on the running wheel bracket next to the right running
wheel securely.
8.3

Adjusting the castor wheels

Instructions for adjusting the castor wheels:
33
1. Turn the machine off.
2. Disconnect the machine from the
mains power.
3. Loosen the lock nut (1).
4. Turn the castoring shaft with the
hexagon socket screw key until
both of the castor wheels
bear weight.
5. Tighten the lock nut.
02/2008