Disassembling For Transport; Removing The Guide Tube - Frank PYTHON C 048666 Operating Instructions Manual

Operating instructions
Parquet floor sander Python C 3,2kW/50Hz
with gentle lifting lever
6

Disassembling for transport

For easy transportation the motor and the guide tube can be removed.
6.1

Removing the guide tube

Caution!
Injury to the operator or other persons could occur or damage could occur if the machine
starts up unintentionally. Disconnect the machine from the power supply before working
on the machine!
Instructions:
1. Fold down the cable arm (3).
2. Move the main lifting lever (2) to the front position in order to lower the sanding drum to the
floor. This removes the load from the control rod (5).
3. Loosen both of the wing screws a little (4). Push the handle down to detach the control rod
(5) from the connector (8).
4. Open the guide tube support (7) with the clamping lever (6) and pull the guide tube (1) out.
11 02/2008