Frank PYTHON C 048666 Operating Instructions Manual page 28

9. At the end of the forward movement, before the movement has finished, raise the sanding
drum from the floor again by pulling the gentle lifting lever (2).
10. Every forward movement is followed by a backward movement. The backward movement
covers the same path as the forward movement. For each forward movement, move the
machine about 10 cm to the right of the sanding path you have just finished.
Caution!
Never allow the machine to come to a standstill for even a short moment while sanding
because this would cause an indentation in the floor. This means that whenever
changing between a forward and a backward movement, the sanding drum must be
raised from the floor while the machine is still moving evenly, and only lowered when the
machine is moving evenly again.
28
Operating instructions
Parquet floor sander Python C 3,2kW/50Hz
with gentle lifting lever
2
02/2008