Adjusting The Running Wheels - Frank PYTHON C 048666 Operating Instructions Manual

8.2

Adjusting the running wheels

If the machine only sands on one side, the surface setting must be adjusted. Following
replacement of the sanding drum or running wheels, the surface setting must always be newly
adjusted. To make a level, uniform setting, the sanding drum and the running wheels must rest
on the same plane. The right running wheel is adjustable. The left wheel does not adjust.
Instructions:
1. Turn the machine off.
2. Disconnect the machine from the mains power.
3. Lay the machine on its left side.
4. With the running wheel adjustment device determine the position of the left running wheel.
5. Loosen the cam fixation screw on the running wheel bracket next to the right running wheel.
32
Operating instructions
Parquet floor sander Python C 3,2kW/50Hz
with gentle lifting lever
02/2008