Sanding With The Python C - Frank PYTHON C 048666 Operating Instructions Manual

Operating instructions
Parquet floor sander Python C 3,2kW/50Hz
with gentle lifting lever
7.10 Sanding with COBRA
1
1. Before starting the machine, the main lifting lever for the sanding drum (1) must be in the
rear position. The sanding drum is clearly raised from the floor. The distance to the floor is
approx. 15 mm.
2. Before starting the machine, ensure that the sanding belt is tightened.
3. Bring the machine into the start position.
4. Set the switch to setting "I". Once the motor has started up, switch to setting "II". This
gradual start-up procedure avoids high start-up currents.
25 02/2008