Table of Contents
Advertisement
Quick Links
Model 10370-70
Installation and Operation Manual
Foreword .........................................................................................................................................1
Scope of Manual ...................................................................................................................................... 1
Nomenclature .......................................................................................................................................... 1
Ordering Replacement Parts ................................................................................................................. 1
Service and Repair .................................................................................................................................. 1
Confidentiality Notice ............................................................................................................................. 2
FCC Licensing Information ................................................................................................................... 2
Computer Software Copyrights ............................................................................................................. 3
Warranty ................................................................................................................................................. 3
Safety and General Information ............................................................................................................ 4
Operational Cautions .............................................................................................................................. 5
Safe Handling of CMOS Integrated Circuit Devices ........................................................................... 6
General Information .......................................................................................................................7
Product Overview ................................................................................................................................... 7
Features and Functions .......................................................................................................................... 8
System Requirements and Limitations ................................................................................................. 8
Available Models ..................................................................................................................................... 9
Replacement Parts and Kits ................................................................................................................. 10
Performance Specifications ..........................................................................................................10
Programming and Set Up .............................................................................................................12
Opening the VoIP Interface/Amplifier Assembly .............................................................................. 12
WiFi Interface Setup (Models 10370-801 and 10370-802)................................................................. 13
VoIP PCBA Configuration ................................................................................................................... 16
VoIP PCBA Initial Network Configuration ........................................................................................................ 16
Closing the VoIP Interface/Amplifier Assembly ................................................................................ 16
Installation ....................................................................................................................................17
Safety and General Information .......................................................................................................... 17
Outdoor Installation Product ............................................................................................................................... 17
Antenna Care ...................................................................................................................................................... 17
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW
®
G A I - T R O N I C S
C O R P O R A T I O N
A H U B B E L L C O M P A N Y
x
T
C
A B L E O F
.
-
.
GAI
TRONICS
COM FOR PRODUCT LITERATURE AND MANUALS
O N T E N T S
Pub. 42004-463A
x
Advertisement
Table of Contents
Related Manuals for GAI-Tronics 10370-70x
Summary of Contents for GAI-Tronics 10370-70x
-
Page 1: Table Of Contents
Safety and General Information ......................17 Outdoor Installation Product ..........................17 Antenna Care ..............................17 GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 ISIT WWW TRONICS COM FOR PRODUCT LITERATURE AND MANUALS... - Page 2 Speaker Connection ............................21 Output Contact Connections ..........................21 Audio Output Connections ..........................21 GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA 610-777-1374 800-492-1212 Fax: 610-796-5954 ISIT WWW TRONICS COM FOR PRODUCT LITERATURE AND MANUALS...
-
Page 3: And 10370-80
Scope of Manual This manual offers descriptive data and service information for the VoIP Interface Assemblies. Nomenclature The model number, located on the nameplate on top of the speaker, specifically identifies GAI-Tronics equipment. Ordering Replacement Parts When ordering replacement parts or requesting equipment information, please include the complete identification number. -
Page 4: Confidentiality Notice
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. -
Page 5: Computer Software Copyrights
GAI-Tronics. Warranty GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall comply with the then-current product specifications and product literature, and if applicable, shall be fit for the purpose specified in the agreed-upon quotation or proposal document. -
Page 6: Safety And General Information
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 4 of 23 Safety and General Information Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. Power Sources - Operate this unit only from the type of power source indicated on the label. If unsure of the type of power supply to use, contact qualified service personnel. -
Page 7: Operational Cautions
Do NOT hold the antenna when the radio is IN USE. Holding the antenna affects the effective range. Approved Accessories Only use GAI-Tronics Corporation approved accessories. Please visit www.gai-tronics.com. Electromagnetic Interference/Compatibility Electronic equipment may be susceptible to electromagnetic interference. If you experience interference, visit the FCC website at http://www.fcc.gov... -
Page 8: Safe Handling Of Cmos Integrated Circuit Devices
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 6 of 23 Safe Handling of CMOS Integrated Circuit Devices Many of the integrated circuit devices used in communications equipment are of the Complementary Metal Oxide Semiconductor (CMOS) type. Because of their high open circuit impedance, CMOS integrated circuits are vulnerable to damage from static charges. -
Page 9: General Information
The Model 10370-80x series VoIP WiFi Speaker Interface/Amplifier Assembly provides the same capability as the Model 10370-70x series but allows connection to an existing wireless network. The interface/amplifier assemblies can easily be added to an existing network (10/100 baseT Ethernet) or wireless network (IEEE 802.11 b/g) with minimal cost or effort. -
Page 10: Features And Functions
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 8 of 23 Features and Functions The GAI-Tronics Models 10370-70x VoIP and 10370- 80x VoIP WiFi Interfaces are equipped with the following features: Wired or WiFi VoIP One-way broadcasting from IP network ... -
Page 11: Available Models
Dedicated systems, such as Gatekeepers, VoIP-enabled PABXs or soft PABXs may also provide these functions. The GAI-Tronics VoIP Interfaces only support Session Initiation Protocol (SIP) to RFC3261 Call Control signaling. In addition to direct access, peer-to-peer or via a SIP server, each interface/amplifier is capable of receiving a Multicast broadcast. -
Page 12: Replacement Parts And Kits
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 10 of 23 Replacement Parts and Kits Table 2. Spare Parts List 10370- 10370- 10370- 10370- Part No. Description 100-02-7013-000 VoIP PCBA 69625-001 VoIP Broadcast Carrier PCBA ... - Page 13 Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 11 of 23 WiFi Module, -801 and -802 models only Antenna (internal) ..............2.4 GHz, 2.0 dBi, 50-ohm, omni-directional, ¼ wavelength dipole configuration, VSWR <2.0 Standards ......................Wireless 802.11b, 802.11g Static IP provisioning or DHCP STUN client (NAT traversal) Frequency .......................
-
Page 14: Programming And Set Up
Page 12 of 23 Programming and Set Up : The 10370-70x and -80x VoIP Interface/Amplifier Assemblies include the same embedded browser as do GAI-Tronics’ VoIP and WiFi telephones. There are many programmable parameters utilized by our telephones that are not utilized by the VoIP Interface/Amplifiers. All amplifiers are factory programmed for maximum operating proficiency. -
Page 15: Wifi Interface Setup (Models 10370-801 And 10370-802)
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 13 of 23 WiFi Interface Setup (Models 10370-801 and 10370-802) Configuration of the WiFi Interface PCBA is required to set up security of the WLAN unit’s connection. For first time configuration of the WiFi interface, power the unit by connecting 120/240 V ac to TB101. - Page 16 Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 14 of 23 Figure 4. WiFi Interface Network Configuration Webpage f:\standard ioms - current release\42004 instr. manuals\42004-463a.doc 09/13...
- Page 17 Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 15 of 23 In the Network Configuration page, enter the parameters WLCH, WSTO, WLK1, WLPP and WLSI. Other settings need not be entered. WLCH is the Wireless LAN Channel. WSTO is the Wireless Security Type. The following are the choices: Table 3.
-
Page 18: Voip Pcba Configuration
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 16 of 23 VoIP PCBA Configuration For the first time configuration of the VoIP PCBA, power the unit by connecting +24 V dc to TB101 and connect Ethernet port of the VoIP PCBA to a 10/100 base-T Ethernet Network. Refer to Figure 6. -
Page 19: Installation
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 17 of 23 Installation Safety and General Information Install equipment without modification and according to all applicable local and national electrical codes. Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1), and local codes for specific requirements regarding your installation. -
Page 20: Mechanical Receipt Inspection
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 18 of 23 Mechanical Receipt Inspection The Speaker Interfaces are shipped in a cardboard container, protected from movement and distress by a self-forming packaging material. Thoroughly inspect it as soon as possible after delivery. In-transit damage should be immediately reported to the transportation company. -
Page 21: Mounting
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 19 of 23 Mounting 1. Loosen the four screws on the front cover. Open the front cover of the enclosure to the left. 2. Remove the cable connections between the front panel and rear enclosure. -
Page 22: Field Wiring
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 20 of 23 Field Wiring WARNING Do not apply power until all the connections have been wired. After all the field wires are pulled through the rear enclosure, install all connections as indicated below. -
Page 23: Speaker Connection
Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 21 of 23 Speaker Connection 8-Ohm Output Connect an 8-ohm speaker to connector TB3 terminals 1 and 2 (Models 10370-701 and 10370-801 only). Refer to Figure 6 and Table 7. - Page 24 Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 22 of 23 Table 6. Recommended Cabling Cable Use Recommended Size Conductor Range Cat5 or Cat5e UTP cable with an RJ45 connector Power Two-conductor, No. 18 AWG is typical No.28–12 AWG Speaker Two-conductor twisted pair, No.
- Page 25 Pub. 42004-463A Model 10370-70x and 10370-80x VoIP Interface/Amplifier Assemblies Page 23 of 23 Figure 7. VoIP PCBA – Component Locations f:\standard ioms - current release\42004 instr. manuals\42004-463a.doc 09/13...
Need help?
Do you have a question about the 10370-70x and is the answer not in the manual?
Questions and answers