HIKVISION DS-9104HFI-ST series Quick Operation Manual page 14

Quick Operation Guide of Digital Video Recorder
No. Item
1 VIDEO IN
2 LOOP OUT
(for
DS-9100/9000HFI-ST/RT/XT
& 9100/9000HWI-ST series)
3 VIDEO SPOT OUT
4 VIDEO OUT
5 AUDIO OUT
6 LINE IN
7 AUDIO IN
8 AUDIO IN
(for
DS-9100/9000HFI-ST/RT/XT
& 9100/9000HWI-ST series)
9 RS-232 Interface
10 VGA
11 HDMI
12 eSATA (Optional)
13 LAN Interface
14 Termination Switch
RS-485 Interface
15
Controller Port
ALARM IN
ALARM OUT
16 GROUND
17 AC 100V ~ 240V
18 POWER
DS-8100/8000HWI-ST
Description
BNC connector for analog video input.
BNC connector for video loop output.
BNC connector for video output.
BNC connector for video output.
RCA (for DS-9100/9000HFI-ST/RT/XT & 9100/9000HWI-ST) /
BNC (for DS-8100/8000HFI-ST (HWI-ST)) connector for audio
output. This connector is synchronized with VIDEO OUT.
RCA (for DS-9100/9000HFI-ST/RT/XT & 9100/9000HWI-ST) /
BNC (for DS-8100/8000HFI-ST (HWI-ST)) connector for two-way
audio.
RCA (for DS-9100/9000HFI-ST/RT/XT & 9100/9000HWI-ST) /
BNC (for DS-8100/8000-ST) connector for audio input.
DB26 connector for audio input.
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output and
menu.
HDMI video output connector.
Connects external SATA HDD, DVD-R/W.
Network interface.
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
Connector for RS-485 devices. T+ and T- pin connects to R+ and R-
pin of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first DVR's D+, D- pin should be connected with the
D+, D- pin of the next DVR.
Connector for alarm input.
Connector for alarm output.
Ground (needs to be connected when DVR starts up).
AC 100V ~ 240V power supply.
Switch for turning on/off the device.
12