Pushspeed: Setupthecameramountmovingspeed,highvaluesethighspeed;lowvaluesetlowspeed.
3. sensors advanced calibration
Thisisanadvancedsetup,normallyitdoesnotneedtosetunlessserioustilthashappenedontheTiltorRollaxis.moredetalisplease
readtheX-CAMA10-3Hinitialdataresetguideappendix1.
3.
the Function choosing on single control
Youmaychoosethefunctiononsinglecontrolmode,thedefaultisModeSwitch.
Firmware upgrade
1.
2.
3.
4.
5.
6.
Notice: Pleasedonottouchanythingandkeepthepoweron
duringtheupgrade,iftheupgradeisbreakpleasebacktoSTEP
1 and try again, normally it could be fix automatically. It will
beep4timesafterupgradeandthesystemwillberestarted.
PowerofftheX-CAMA10-3H
Uses the USB cable to connect with your PC, Normally
the windows can find the driver automatically, you will
findthePORTnumberinthedevicemanager.
SelecttheCOMportnumber
Openthefirmwarefile(*.bin)
Click"LoadandConnect"button
Power on the X-CAM A10-3H, it will upgrade the
Theblueindicatorwilllight,
firmwareautomatically,
and red indicator will flash quickly. When the
upgradeiscompleted,theredindicatorwilllight,
andtheblueindicatorwill flashquickly