Video And Audio - Yamaha HTR-5063 Owner's Manual

■
Combining HDMI/AV1-2 input source

video and audio

Audio In
Input source: HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
– an playback device is connected with an HDMI cable but cannot
transmit audio through HDMI
– an playback device with component video output and analog
audio output (such as certain game consoles) are connected to the
system
Inputs that change the audio source
HDMI1 OPTION
;;;;;;
Audio In AV1
Assignable audio input jacks
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
Audio inputs Settings method
Optical digital audio Select AV1 or AV4. Connect the external component
input audio cable to the optical digital jack for the selected
input.
Coaxial digital audio Select AV2 or AV3. Connect the external component
input audio cable to the coaxial digital jack for the selected
input.
Analog audio input Select one of AV5, AV6, AUDIO1, or AUDIO2.
Connect the external component audio cable to the
audio jack for the selected input.
J J
1 : AV5-6 or AUDIO1-2 are also available when the "Audio Return Channel"
function is on, and the source is used for the TV audio input (TV Audio In).
• For details of settings, refer to "Receiving video signals from the
HDMI jack and audio signals from a jack other than HDMI"
(☞p. 18) and "Component connections to analog audio output
devices" (☞p. 19).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
■
Displaying information on audio/video
signals
Signal Info
J1
Input source: HDMI1-4, AV1-4
Displays information on digital audio and video signals on the TV
screen.
Menu item
HDMI1 OPTION
AUDIO
Format Dolby D
Channel 3/2/0.1
Sampling 48kHz
Bitrate 384kbps
VIDEO
In HDMI 1080p
Out HDMI 1080p
Configuring the settings specific for each input source (Option menu)
Audio information
Format
Channel
Sampling
Bitrate
Video information
In
Out
Message
(appears only
when an error
has occurred)
Information
• "No Signal" is displayed when no signals are being received, and
"---" is displayed if this unit cannot recognize the incoming
signal.
• The bit rate may vary during playback.
SETUP
Format of audio signals.
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, "3/2/0.1" is
displayed.
If a channel that cannot be expressed as the above, a
total number of channels such as "5.1ch" may be
displayed.
The sampling frequency of analog-to-digital
conversion.
The bit rate of input signal per second.
Format and resolution of video input signal.
Format and resolution of video output signal.
Error messages about HDMI signals and components.
Error message
HDCP Error HDCP authentication failed.
Device Over The number of connected HDMI
components is over the limit.
Out of Res.
The connected monitor is not
compatible with the video input
signal.
47
En