Hdmi; Tuner (Fm/Am) - Yamaha HTR-5063 Owner's Manual

HDMI™

Problem Cause
The front panel An error with the HDMI
display HDMI connection has occurred.
indicator is flashing.
No picture or sound. The number of components is over
the limit.
The connected HDMI component
does not support high-bandwidth
digital copyright protection
(HDCP).
(When using HDMI The TV audio output is not
Control function) connected to this unit, or the
TV sound is not setting to match operations carried
output from this unit
out on TV is not set.
when operating the
(When using Audio Return
remote control of the
Channel function)
TV.
The Audio Return Channel
function is not working.
See
Remedy
page
Try re-inserting the HDMI cable. —
Confirm that HDMI video that is not 47
supported by the unit is not being input
(HDMI Input → Option menu → "Signal
Info").
Disconnect some of the HDMI components. —
Connect an HDMI component that supports —
HDCP.
Connect the TV audio output to this unit, 56
and then select the connected input source
in "TV Audio In" (Setup menu → HDMI
Setup → TV Audio In).
Make sure that your TV supports Audio 56
Return Channel.
Set the Audio Return Channel function to
on (Setup menu → HDMI Setup →
AudioReturnChan).

Tuner (FM/AM)

FM
Problem Cause
FM stereo reception
You are too far from the station
is noisy. transmitter, or the input from the
antenna is weak.
There is distortion, There is multi-path interference.
and clear reception
cannot be obtained
even with a good FM
antenna.
The desired station You are in an area far from a
cannot be tuned into
station, or input from the antenna
with the automatic
is weak.
tuning method.
"No Presets" is No preset stations are registered.
displayed.
"Wrong Station" is An invalid FM/AM frequency has
displayed. been input.
APPENDIX
Troubleshooting
See
Remedy
page
Check the antenna connections. 23
Switch to monaural mode. 36
Replace the outdoor antenna with a more —
sensitive multi-element antenna.
Adjust the antenna height or orientation, or —
place it in a different location.
Replace the outdoor antenna with a more —
sensitive multi element antenna.
TUNING H / I
Use to manually select the 35
station.
Register stations you want to listen to as 36
preset stations before operation.
Input a frequency that can be received. —
74
En