Pioneer SPH-DA120 Operation Manual page 80

Chapter
18 System settings
2 Using packing tape or similar, place
markings approximately 25 cm from each
side of the vehicle, and approximately
50 cm and 2 m from the rear bumper.
2 m (6 ft. 7 in.)
Markings
Markings
3 Touch the HOME button to display the
Top menu screen.
4 Touch the following keys in the follow-
ing order.
The "System" screen appears.
5 Touch [Camera settings].
6 Touch [Parking Assist Guide Adjust].
7 Set the guidelines by dragging the four
points.
8 Touch the following keys to adjust the
position of the point if necessary.
Moves the point to the left.
Moves the point to the right.
Moves the point upward.
Moves the point downward.
80
En
50 cm (1 ft. 8 in.)
25 cm
(9-7/8 in.)
25 cm
(9-7/8 in.)
Rear bumper
Extends the line to the left and right
from the current center point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Shortens the line from the left and right
to the current center point of the dis-
tance guideline. The adjustment points
on the lateral coordinates at both ends
will also move.
Resets the settings of the distance and
Default
vehicle width guidelines and adjust-
ment points to the default.
p When a point is moved, the distance from
the initial value is displayed at the bottom
of the screen.
Turning off the demo screen
If the demo screen appears, perform the fol-
lowing procedure to turn off the demo screen.
1 Touch the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The "System" screen appears.
3 Touch [Demo Mode] repeatedly until
the desired setting appears.
! On (default):
Displays the demo screen.
! Off:
Hides the demo screen.
Selecting the system language
The system language can be selected.
! The language can be changed for the fol-
lowing:
— The "Audio" screen