Connectors For Peripherals And Hale Cey System - Mercedes-Benz Vito Supplement Owner's Manual

Connectors for peripherals and
HALE CEY system
The connectors for the taximeter peripher-
als, the separate 12 volt power supply and
the HALE CEY system are secured in the
lower section of the centre console* or in
the footwell trim.
1 Connector for taximeter peripherals
2 HALE CEY system connector
3 12 volt power supply connector
Connector 1:
Pin Assignment
1 Not used
2 Not used
3 Not used
4 Not used
5 CAN-Hale (high)
6 CAN-Hale (low)
7 Power supply (terminal 30)
Maximum load: 5 A
8 Earth (terminal 31)
9 Not used
10 Not used
Practical advice
Connectors
Connector 2:
Pin Assignment
1 Data
2 Ground
Connector 3:
Pin Assignment
1 Power supply (terminal 30)
Maximum load: 10 A
2 Earth (terminal 31)
i
The electrical connection components
can be found together with the vehicle
documents. They can also be obtained
from any Mercedes-Benz Service Cen-
tre.
Order numbers ( page 48)
3
43