8 Torx screws
9 Trim
a Two-way radio connection cable
Unscrew the seven Torx screws 8
from trim 9
Fit trim 9 over the gear lever and link-
age. Take care not to damage the bulb
holder in the ashtray light and the ciga-
rette lighter connection cable when
doing this.
b Torx screws
c Two-way radio mounting frame
Practical advice
Installing the two-way radio
Unscrew both Torx screws b from
two-way radio mounting frame c.
i
If no radio is fitted in the centre con-
sole, you must remove a double mount-
ing frame. This is secured by four
screws.
Remove two-way radio mounting
frame c from the installation space.
Secure the two-way radio using either a
DIN-compliant adapter or a screw con-
nection on two-way radio mounting
frame c.
3
33