Mercedes-Benz Vito Supplement Owner's Manual page 31

Practical advice
Installing the taximeter
Guide taximeter connection cable 4
into installation space 2 on lower sec-
tion of the centre console 3.
i
To install a two-way radio in the lower
section of the centre console, guide
two-way radio connection cables 5
into installation space 2.
Connect the taximeter/two-way radio
in accordance with the manufacturer's
3
wiring diagram.
Pin assignment for taximeter connec-
tor ( page 41).
Pin assignment for two-way radio con-
nector ( page 40) and aerial
( page 39).
28
Press the taximeter/two-way radio
into the installation aid and make sure
it is firmly seated.
Refit lower section of the centre
console 3. Take care not to damage
the two-way radio loudspeaker in the
front-passenger footwell (
and the routing of the connection
cables under the console.
Reconnect the battery.
Disconnect the quiescent current
retention unit.
Carry out a function check on the
taximeter/two-way radio.
Two-way radio operation (
i
Information and documents about cali-
brating the taximeter can be obtained
from any Mercedes-Benz Service Cen-
tre.
page 15)
page 18)