LightwaveRF LW450 Connect Series Instruction Manual page 16

FAQs
Q.
Can I use non dimmable lamps (bulbs) if I don't dim them?
A.
No. The lamps must be dimmable even if they are not dimmed; the
technology in the lamp must be compatible with that of the dimmer.
Q.
What if I need a switch to operate on/o
A.
A LightwaveRF Relay in conjunction with a Wire-free Switch can be used
for on/o switching in place of the dimmer (see www.lightwaverf.com).
Q.
Can I separate and change individual switches in multigang Dimmers?
A.
Multigang dimmers are not designed to have their switch modules
separated and interchanged; disconnecting and removing Dimmer Modules
will invalidate the warranty.
Q.
What Happens after a power cut?
A.
Standard LightwaveRF dimmers default to the o
cut. The 2-Way Dimmer will, therefore, also default to o . This can be
overridden using the Lightwave Link to set default status for devices on power
up. See www.lightwaverf.com for details.
Q.
Is it normal for the dimmer to get warm when it is turned on?
A.
Yes it is perfectly normal for dimmer switches to feel warm to the touch if
left on for a period of time close to maximum load. It is completely safe.
only?
position after a power