LightwaveRF LW450 Connect Series Instruction Manual page 15

FAQs
Q.
Can I link the 2-Way Dimmer to a LightwaveRF controller?
A.
No. The 2-Way Dimmer is designed to take wired commands directly
from the standard Dimmer that it is connected to. It does not contain an RF
module and will not enter linking mode.
Q.
How do I know that the dimmer switch will fit?
A.
The Dimmer is the same size as a standard lightswitch - it will fit all back
boxes (standard lightswitch housing) over 35mm deep.
Q.
Is it legal for me to install the dimmer?
A.
Yes, LightwaveRF is fully legal for you to install in your own home.
Q.
Is there a maximum number of lamps I can control with the dimmer?
A.
You can control any number of lamps (bulbs) as long as they do not exceed
the maximum loading in total. Note: Max. load di ers for LED/incandescent.
Q.
How many devices can I have on the LightwaveRF system?
A.
Each device has 6 memory slots for up 6 controllers (one of these can be
the Lightwave Link allowing up to 6 smartphones to control hundreds of devices.
Q.
Can I use LED or CFL lamps?
A.
Most LEDs can be controlled as long as the lamps are dimmable variants
(see www.lightwaverf.com for guidance). CFLs are not compatible.