Advertisement
1. All servo arms and bellcranks must be vertical or horizontal.
2. Adjust pushrods (1) to level the swashplate.
3. Adjust pushrods (2) to the Hiller bridge until the antorotation ball bearing
is centered in its brass lined slot.
4. Double ball links (3) between flybar and mixer arm are 42 mm long.
5. Adjust the lower ball links (4) between swash plate and mixer arms
until the mixer arms are horizontal.
6. With a pitch gauge check the actual blade pitch and adjust lower ball
links of rod 4 until both blades are at zero degrees pitch.
2
1
®
manual
2
1
3
4
1
29
Advertisement
