Advertisement
Pinspot LED Quad DMX
Master-Slave Setup:
This function will allows you to link units together to run in a Master-
Slave mode. In a Master-Slave set up one unit will act as the control-
ling unit and the others will react to the controlling units built-in pro-
grams. Any unit can act as a Master or as a Slave however, only one
unit can be programmed to act as the "Master."
1. Daisy chain your units via the XLR connector on the rear of the
unit. Use standard XLR microphone cables to link your units
together. Remember that the Male XLR connector is the input and
the Female XLR connector is the ouput. The first unit in the chain
(master) will use the female XLR connector only. The last unit in
the chain will use the male XLR connector only.
2. Set the dipswitch #1 to the ON position, all other dipswitches off
for the "Master" unit.
3. For the "Slave" unit(s), any dipswitch in the On position except
#1.
4. Connect the "Slave" unit or units and they will automatically start
to follow the "Master."
Pinspot LED Quad DMX
Channel
Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 255
5
0 - 255
6
0 - 7
8 - 247
248 - 255
ADJ Products, LLC - www.adj.com - Pinspot LED Quad DMX User Manual Page 8
Operating Instructions
6 Channel Mode
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
WHITE
0% - 100%
MASTER DIMMER
0% - 100%
STROBING
NO STROBING
STROBING SLOW - FAST
SOUND ACTIVE STROBING
Pinspot LED Quad DMX
The UC-IR infrared remote has many differnet functions and gives
you complete control of your Pinspot LED Quad DMX. To control the
your desired fixture you must aim the controller at the front of the fix-
ture and be no more the 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - Hold this button down to fully light up the unit. When you
let the button go, the unit will return to its previous state.
FADE/GOBO - Invalid for this fixture.
COLOR - Press buttons 1-9 to choose a desired color. Adjust
the output intensity using either the number buttons, or using the
"DIMMER +" and "DIMMER -" buttons.
STROBE - Press and hold this button the to strobe. This function is
only valid under color mode.
SOUND ON & OFF - These buttons activate and deactivate the
sound active mode.
SHOW - This button will activate the random show (default). Press the
buttons 1-9 to select a different show.
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the out-
put intensity in Color mode.
Pinspot LED Quad DMX
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
ADJ Products, LLC - www.adj.com - Pinspot LED Quad DMX User Manual Page 9
UC-IR Remote
Cleaning
Advertisement
