Remote Control - SONIQ QMD78DS Qmedia Instruction Manual

Table of Contents

Advertisement

Remote Control

Using the Remote Control
• Point the remote control at the
REMOTE SENSOR located on
the unit.
• When there is a strong ambient
light
source,
the
ance of the infrared REMOTE
SENSOR may be degraded,
causing unreliable operation.
• The recommended effective
distance for remote operation
is about 16 feet (5 meters).
WARNING:
• Do not dispose of the battery in
fire or it may explode or leak.
• Batteries shall not be exposed
to excessive heat such as
sunshine, fire or the like.
CAUTION:
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.
1) VIDEO MODE button
Adjusts Brightness, Contrast or
Colour of the LCD screen.
2)
PREV button
Moves
back
through
chapters or tracks on a disc.
3)
/
SEARCH buttons
SEARCH:
Fast
playback.
SEARCH: Fast
playback.
4) GOTO button
Skips directly to a location on a
DVD.
5) Cursor ( ,
, , ) buttons
Use to move between selections
on a menu screen and adjust
certain settings.
ENTER button
Confirms selections on a menu
screen.
6) MEMORY button
In STOP mode, sets titles/
chapters in a favourite order.
7) Number (0 - 9) buttons
Use when creating programs,
entering
parental
password or locating a title/
chapter/track or specific time.
8) REPEAT A-B button
Performs point-to-point repeat
Take out the PVC sheet before
operating the Remote Control.
perform-
To Change Remote Battery
1. Open the battery door.
2. Insert one CR2025 (3V) size
battery.
playback on a DVD or CD.
REPEAT DISC button
Repeats a DVD chapter or title.
Repeats a CD track or the entire
titles,
disc.
SETUP button
When a DVD is stopped, brings
reverse
up the unit's SETUP menu.
9) SUBTITLE button
forward
Selects one of the subtitle
languages programmed on a
DVD (if available).
RETURN button
Returns to normal operation
after using the SETUP menu of
a DVD.
10) AUDIO button
Selects one of the audio sound
tracks on a DVD (if more than
one is available) or select the
audio output mode on a CD.
11) ANGLE button
Switches
camera angles when the DVD
you are playing has been
programmed
control
camera angles.
12) DISPLAY button
Shows status information on the
screen.
between
multiple
with
multiple
- 5 -
Battery Replacement
When the battery becomes weak,
the operating distance of the remote
control will be greatly reduced
and you will need to replace the
battery.
Note :
• If the remote control is not
going to be used for a long time,
remove the battery to avoid
damage
caused
leakage corrosion.
• Corrosion, oxidation, battery-
leakage and any other gradually
acidic defect of this nature will
void the warranty.
• When
discarding
environmental problems must
be considered and local rules or
laws governing the disposal of
these batteries must be strictly
followed.
13)
STOP button
Stops playing a disc.
PLAY button
Starts or resumes playback of a
disc.
PAUSE button
Pause
playback
advance.
14)
NEXT button
Moves forward through titles,
chapters or tracks on a disc.
15) MENU button
Enters and exits the main DVD
menu.
by
battery
batteries,
and
frame

Advertisement

Table of Contents
loading

Table of Contents