Table of Contents
Advertisement
Connections
C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only)
The DVD Player can play two channels Dolby Digital.
Listening on External Audio Equipment
1. Connect the DVD Player to the left/right Audio In
jacks on the other equipment using a standard
Audio cable (not included).
2. Turn on the DVD Player.
3. Turn on your audio equipment and follow the
instructions provided with it to select the AUDIO
IN function.
Notes:
• Make sure to use the correct Audio cable. Connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
D. Connecting Game Systems/Video Equipment (for the Monitor Only)
you can connect game systems or other video equipment for playback through the monitor only. you cannot
connect these systems to the DVD Player.
Watching video equipment
1. Connect the other equipment to the monitor using a standard AV Cable (not included).
2. Turn on the monitor.
3. Turn on the video equipment and follow the instructions provided with it to playback.
Notes:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal.
• If you have a mono VCR, the volume level from the speakers will be low.
Video Equipment
Game System /
DVD player
right side
To Audio OUT jacks
left side
AV cable
(not included)
To A/V IN jacks
- 9 -
Audio cable
Stereo Receiver /
(not included)
Monitor -
right side
Amplifier
Advertisement
Table of Contents
