Table of Contents
Advertisement
Customizing the Function Settings
RATING
Parental Control
DVDs are rated according to their content and some are
equipped with a password function. The contents allowed by
parental lock level and the way a DVD is controlled may vary
from disc to disc. For example, if the disc allows, you could lock
out violent scenes unsuitable for children or you could lock out
playback of the disc altogether.
You cannot play password function equipped DVDs rated
higher than the level you selected unless you cancel the
parental lock function.
1. Press the SETUP button in stop mode.
2. Press the
/
button to select Rating.
3. Press the
button, then press the
4. Press the ENTER button, "Enter Password" screen will appear.
5. Press the number buttons to input the current password (If the password has not been set yet after you
purchase this unit, it is "8888"). Then press the ENTER button.
6. Press the ENTER button again to list the Parental Control level.
The parental lock levels are equivalent to the following ratings.
1 : KID SAFE
5 : PG-R
7. Press the
/
button to select the rating from 1 to 8. Press the Enter button to confirm. (Rating 1 has the
most restrictions while rating 8 can virtually playback all DVD software.)
8. Press the SETUP button or RETURN button to exit the menu.
Set Password
1. Press the SETUP button in stop mode.
2. Press the
/
button to select Rating.
3. Press the
button, then press the
Password.
4. Press the ENTER button, "Enter Password" screen will
appear.
5. Press the number buttons to input the current password (If the
password has not been set yet after you purchase this unit, it is
"8888"). Then press the ENTER button.
6. Press the ENTER button again, "Enter New Password"
screen will appear. Press the number buttons to input the new
password. Press the ENTER button. Now your new password
has been set. Be sure to remember this number!
7. Press the SETUP button or RETURN button to exit the menu.
/
button to select Parental Control.
2 : G
3 : PG
6 : R
7 : NC-17 8 : ADULT
/
button to select Set
If you forget the password, you can erase your current
password by pressing the number button 8 on the remote
four times, then press the ENTER button to confirm the
setting (PASSWORD : 8 8 8 8).
4 : PG-13
- 20 -
Advertisement
Table of Contents
