Installing In Macintosh - Epson Stylus Photo 1290 User Manual

After the setup is complete, proceed to section
first page.

Installing in Macintosh

Follow the instructions in this section to install the printer
software, select your printer in the Chooser, and install EPSON
PhotoQuicker.
c
Caution:
Turn off all virus protection programs before you install the
printer software.
Installing the printer software
Follow these steps to install your printer software.
1. Turn on your Macintosh and insert the software CD in the
CD-ROM drive. The EPSON printer software CD-ROM opens
automatically.
2. If the Install Printer Driver/Utility folder appears in the EPSON
folder, open it and then double-click the Installer icon.
Note:
❏ It is possible to install the Reference Guide on your hard drive
from the printer software CD-ROM. To install the guide, click
Install Reference Guide and follow the on-screen
instructions. When the installation is complete, a View
Reference Guide icon appears in the EPSON folder.
Double-click the icon to open the guide.
❏ It is possible to access Technical Support from the printer
software CD-ROM. Insert the CD in the CD-ROM drive and
open the Install Printer Driver/Utility folder in the EPSON
folder. Then double-click the Technical Support Web Site
icon.
to print your
15