Installing In Macintosh - Epson Stylus color 860 Setup Manual

Ensuring that the USB Driver was installed correctly
Use the following procedure to confirm that the USB driver was installed
correctly.
1. Click the Start button, point to Settings and click on the Printers folder.
Make sure that the icon for the printer appears in the Printers folder.
2. Click the printer icon, and select Properties from the File menu.
3. Click the Details tab and make sure that EPUSBx: (EPSON Stylus
COLOR 860) is displayed in the Print to the following port list box.
4. If the correct port is not displayed, refer to the Troubleshooting section
of the Daily Use guide or the Online Guide.

Installing in Macintosh

c
Caution:
Turn off all virus protection programs before you install your printer
software.
Note:
To connect your printer to the USB interface on your Macintosh, you must purchase
a USB cable.
Follow these steps to install your printer software.
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive.
2. The EPSON printer software disk opens automatically.