Loading Envelopes - Epson Stylus Photo 1290 User Manual

Matte Paper-Heavyweight
Premium Glossy Photo Paper
Ink Jet Back Light Film
(only for Stylus Photo 1290)
* Take care not to print on support sheets that are loaded under special
media.

Loading Envelopes

When printing on envelopes, please note the following:
❏ You can load up to 10 envelopes at a time in the sheet feeder.
Note:
The folding quality and thickness of envelopes vary widely. If the
total thickness of the stack of envelopes exceeds 10 mm, press each
envelope in the stack flat before loading. If print quality declines
when a stack of envelopes is loaded, load one envelope at a time.
❏ Set the adjust lever to the "+" position. To do this, open the
printer cover and reposition the lever.
Note:
❏ Return the adjust lever to the "0" position, which is the normal
position, after you finish printing on envelopes. Leaving the
lever in the "+" position may cause gaps to appear in images
printed on other media.
❏ When the adjust lever is in the "+" position, make sure the High
Speed setting in the printer driver's Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
Up to 20 sheets. Always place a
support sheet* under the stack
of Matte Paper-Heavyweight.
For A3 and Super A3 size, you
can only load one sheet at a
time (only for Stylus Photo 1290).
One sheet at a time.
One sheet at a time.
Always put a sheet of plain
paper under back light film.
37