Connecting The Fm Amplifier - Triax CGA 225 Assemb

• After installing the module close the locking device
arrow (fig. 2).

3.2 Connecting the FM amplifier

• After setting the FM amplifier (chap. 4) connect its output
G
inputs of the quad output collector using the attenuator
F cable supplied.
• Connect input
the rear wall via the cable inlet
approx. 80 cm).
Fig. 2
D
of the FM amplifier to one of the preinstalled F terminals in
Fig. 3
F
using an HF cable made on-site (length
- 6 - - 6 -
1
in the direction of the
C
to one of the
E
and the IEC /