Table of Contents
Advertisement
Camera Operation
SHUTTER (condition and speed control)
Because of using the DC lens, the shutter speed is fixed at 1/60
1. When the SETUP menu is on the screen, please position the arrow to point
to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency. NTSC Model:1/100, PAL
MODEL: 1/120
3. Please press the SETUP button when all the settings are complete.
WHITE BALANCE control
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
COLOR CCD CAMERA
20
User's Manual
*Please select one of the 3 modes below.
ATW(Auto Tracking White Balance):
This mode can be used within the color temperature range 1,800°K ~ 10,500°K
(Ex. fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
AWC(Auto White Balance Control):
Please press the SETUP button while the camera is directed at a piece of white
paper to obtain the optimum state under current illumination. If the environment
including the light source is changed, you have to adjust the white balance again.
MANUAL:
The manual adjustment mode enables finer adjustment.
Please select ATW or AWC first. Please change to manual adjustment mode and
press the SETUP button. Please set the appropriate color temperature, and then
increase or decrease the red and blue color values while monitoring the color
changes on the object.
Notes
•Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
When the object's surroundings have a very high color temperature (Ex. a clear
sky and sunset)
When the object's surroundings are dark
If the camera directly faces a fluorescent light or is installed in a place where
there are considerable changes in illumination, the WHITE BALANCE function
may become unstable.
COLOR CCD CAMERA
21
User's Manual
Advertisement
Table of Contents
