Related Manuals for Samsung SCC-C6403
Summary of Contents for Samsung SCC-C6403
- Page 1 SmartDome Camera SCC-C6403 Owner’s Instructions Manuel d’instruction Manual del usuario Part : AB68-00570A(00)
-
Page 2: Important Safety Instructions
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. -
Page 3: Fcc Statement
9. If this product fails to operate normally, contact the store of purchase or your nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. -
Page 4: Table Of Contents
Before Usage This is a basic instruction manual for the SCC-C6403 user. It contains all the instructions needed to use the SCC-C6403 from a simple introduction of the control locations and functions of the SCC-C6403 to installation methods in the set up menu. -
Page 5: Chapter 1 Scc-C6403 Overview
- CAM RESET...3-28 - LANGUAGE...3-28 - PASSWORD...3-28 8. SYSTEM INFO ...3-29 9. Short Keys ...3-30 Product specifications ... 3-32 Chapter 1 SCC-C6403 Overview In this chapter we will briefly introduce the SCC-C6403 and show main functions, locations of control and Switch Setting. -
Page 6: Scc-C6403 Introduction
SCC-C6403 Introduction SCC-C6403 is a zoom lens built in smart dome camera which provides you with the best monitoring function in connection with CCTV at banks or companies. The SCC-C6403 is a high quality surveillance camera using x32 zoom lens and digital zoom IC, it can catch clear images up to 320 times. -
Page 7: Adapter Connection
ADAPTER CONNECTION BACK SCC-C6403 Adapter BOARD AC 24V POWER AC 24V POWER... -
Page 8: Initial Setting
EX) In case of Camera Address 1, see the following figure for setup. SW701 SW702 SW703 Setting communication Protocol Use number 1~4 PIN of SW704 to set communication Protocol. A : SAMSUNG HALF PIN1 PIN2 PIN3 PIN4 Comp B : SAMSUNG FULL Baud Rate Setting Use PIN 5 and 6 of SW704. -
Page 9: Chapter 2 Scc-C6403 Installation
Chapter 2 SCC-C6403 Installation In this chapter, we will check the contents of the package before installing the SCC-C6403, and prepare a power adapter suitable for the power supply system. (Power Consumption: 18W; Voltage: AC24V, 1.5A) Then, we will install the SCC-C6403 and connect the cables. -
Page 10: Preparing The Cables
To install and use the SCC-C6403, the following cables should be prepared. Power Adapter Cable The cable that plugs into the SCC-C6403 power input receptacle has the rated voltage of AC24V, 1.5A. Check the rated voltage before using the cable. -
Page 11: Installing Scc-C6403
Installation Precautions 1) Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6403 SmartDome Camera and other accessories. 2) Install in an area where the space above the ceiling board is over 18 cm (7 in.) high. -
Page 12: Installing The Camera
5) CEILING MOUNT ADAPTOR (SADT-100CM) This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling. 6) POLE MOUNT ADAPTOR (SADT-100PM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-100WM) to a pole that is over 8 cm (2.76 in.) in diameter. -
Page 13: Chapter 3 Setup Menu Overview
Chapter 3 Setup Menu Overview [Figure 6] In this chapter, we will look over the Setup Menu of the SCC-C6403, First we'll look over the overall structure of the Setup Menu, and then we'll look at the functions of each menu. [Figure 7]... -
Page 14: Structure Of The Setup Menu
SYSTEM INFO The diagram shown above illustrates the overall structure of the Setup Menu. In this section, a description of the Setup menu features will enable users of the SCC-C6403 to tailor it to their personal needs. ALARM1~4 EXIT QUIT/SAVE... -
Page 15: Camera Set Menu
1. CAMERA SET MENU CAMERA ID The CAMERA ID menu assigns an ID to the SCC-C6403 to be displayed on the connected monitor.On the CAMERA SET menu screen, select CAMERA ID to ON and press [Enter]. You will see the sub screen for deciding on the ID of the SCC-C6403. -
Page 16: Color/Bw
COLOR/BW In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter. In a poor illumination environment, the IR filter is turned off in the BW mode the its sensitivity increases as high as a black and white camera. On the other hand, the IR filter is turned on and the sensitivity decreases in the COLOR mode. -
Page 17: Zoom Speed
The magnification ratio ranges from OFF to 10. If you set Digital Zoom of SCC-C6403 to max. 10 times, the mode will become the 32 time optical zoom and you will be able to enlarge a subject by max. 320 times. -
Page 18: Exit
EXIT The EXIT menu is used to quit the CAMERA SET menu of the SCC-C6403 and return to the MAIN MENU. - QUIT : Ignores the changed information and restores the saved information. - SAVE : Saves the information of the setting condition of the menu. -
Page 19: Shutter
SHUTTER You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image. The AUTO slow electronic shutter supports 12 shutter speeds from x2 to x160 and sets the shutter speed to be slow In order to make the image on the screen more distinct and brighter when you photograph under dark illumination. -
Page 20: White Bal
WHITE BAL Lights are generally denoted as color temperatures and expressed in Kelvin (K) units. The general light color temperatures are shown below. 10000K Blue sky 9000K Rainy 8000K Cloudy 7000K 6000K Sunny 5000K 4000K 3000K Halogen lamp 2000K Candlelight 1000K 3-14 You can select one of four modes for white balance adjustment as follows:... -
Page 21: Focus Mode
FOCUS MODE In the FOCUS MODE MENU, the Focus method can be set to ONEAF (One Auto Focus), or MF(Manual Focus). - ONEAF : In the ONEAF mode, it automatically sets the focus after the PAN/TILT/ZOOM moves, and operates as the same in the MF mode if the PAN/TILT/ZOOM does not move. -
Page 22: Position Set
POSITION SET From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu. PRESET ID This is the ID set up function for each PRESET. It can be set up to 12 characters using the left, right, up, and down keys. -
Page 23: Location
ZONE AREA Press [ENTER] to enter the ZONE AREA MAP screen from “ZONE AREA SET...”. Select a ZONE AREA number from the ZONE AREA MAP screen and press [ENTER] to enter the ZONE AREA setup screen. (ZONE SET) ZONE DIR SET ZONE AREA SET ON... -
Page 24: Auto Set
5. AUTO SET The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it is able to set up the AUTO PLAY motion. AUTO PAN After selecting the locations of two points (PAN/TILT) of START and END, it loops continuously in the set up SPEED. The number of AUTO PAN is up to 4. -
Page 25: Scan
This menu sets up the time during which AUTO PLAY repeats. AUTO PLAY This function sets up the motion which will be repeatedly performed by SCC-C6403 whenever the time set by AUTO RETURN elapses. It covers SCAN, AUTO PAN, PATTERN, and PRESET setup. PLAY NUMBER This menu allocates a number to the motion set by AUTO PLAY. -
Page 26: Alarm Set
6. ALARM SET It consists of 4 ALARM INPUTs and 3 ALARM OUTs.It can sense an ALARM input from exterior SENSORs and it performs with PRESET or PATTERN function and outputs the ALARM OUT signals. Alarm operation time depends on the Preset Dwell time corresponding to the alarm and whether AUTO is involved. -
Page 27: Turbo P/T
PAN/TILT. The speed may go up to 180°/sec(PAN). AUTO CAL This function turns on or off Auto Calibration. SCC-C6403 has the Auto Calibration function to improve the precision of LENS and PAN/TILT motor. You may set to OFF/6H/12H/18H/24H. Without user’s key input for the time designated by the user, A.C will appear on the screen while... -
Page 28: Short Keys
1) The use of AUTO RETURN will be available only when the function equivalent to AUTO PLAY, a sub menu of AUTO SET has been built in. 3-30 SCC-C6403 has two FANs inside for preventing overheating. If FAN doesn't work properly, messages below will be displayed. In those case, replace the FAN. -
Page 29: Product Specifications
- FAN 3-32 Remark • The copyright of the manual belongs to Samsung Electronics Co., Ltd. • Without the permission of Samsung Electronics it cannot be reproduced electronically, mechanically, audibly, or by any other method. • This manual will be modified according to product enhancements.