Safety Zones, Devices And Decals - Quincy Compressor QPNC 10 Operator's Manual

In the event of breakdown or malfunction
of the dryer, switch it off and do not
tamper with it. If repairs are needed, con-
tact a technical assistance center approved
by the manufacturer and insist on the use
of original spare parts. Failure to comply
with the above may cause damage to the
machine.
Before removing the protective guards to
perform any maintenance on the machine,
switch off the electric power supply and
discharge the residual pressure inside the
unit. All work on the unit, however slight,
must be performed
skilled personnel.
The manufacturer does not accept responsibility for injury
or damage caused as a result of negligence or failure to
abide by the instructions given above.

SAFETY ZONES, DEVICES AND DECALS

The appliance may be used only by specially trained and
authorized personnel. Any tampering with the machine or
alterations not approved by the manufacturer relieve the
latter of responsibility for any injury or damage resulting
from the such actions.
This machine is not suitable for outdoor
installation.
The lubricating liquids and other discharge
fluids must not be discharged into the
environment. Polluting
products must be disposed of by authorized
personnel.
Pub. No. 2200772355 — October 2006
by professionally
and hazardous
(1) (2)
The following risks are present on the
machine (see Figure 1):
1. Dangerous electric voltage
2. Air not fit for breathing
3. High pressure
4. Rotating fan
3
1
1
4
FIGURE 1 — SAFETY RISKS
(3) (4)
3
1
2
1
3