Quincy Compressor QPNC 10 Instruction And Maintenance Manual
  1. Manuals
  2. Brands
  3. Quincy Compressor Manuals
  4. Dryer
  5. QPNC 10
  6. Instruction and maintenance manual
Quincy Compressor QPNC 10 Instruction And Maintenance Manual

Quincy Compressor QPNC 10 Instruction And Maintenance Manual

Hide thumbs Also See for QPNC 10:
Table of Contents

Advertisement

Quick Links

INSTRUCTION AND MAINTENANCE MANUAL
READ THIS MANUAL CAREFULLY BEFORE CARRYING OUT ANY OPERATIONS ON THE DRYER.
CONTENTS
PART A: INFORMATION FOR THE USER
ATTENTION: THERE IS A COPY OF THE WIRING DIAGRAM INSIDE THE ELECTRIC PANEL
ADDRESSES OF ASSISTANCE CENTRES
In the event of breakdown or malfunction of the dryer, switch it off and do not tamper with it. If repairs are needed, apply only to a technical
assistance centre approved by the manufacturer and insist on the use of original spare parts. Failure to comply with the above may
endanger the safety of the machine.
INTRODUCTION
Keep this manual with care for future consultation; the use and maintenance manual is an integral part on the dryer. Read this
manual carefully before carrying out any operations on the dryer.
The installation of the dryer and all operations involving it must be performed in conformity with the regulations in force
concerning electric plants and personal safety.
DRYERS
QPNC 10 to QPNC 50
16.0 SCRAPPING THE DRYERS
PART B: INFORMATION RESERVED FOR TECHNICALLY SKILLED
PERSONNEL
2200780113
Cod. 2200780113 01 - Edition 10/2014 - 1
ENGLISH
Code
01
Edit. 10/2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QPNC 10 and is the answer not in the manual?

Questions and answers

Related Manuals for Quincy Compressor QPNC 10

Summary of Contents for Quincy Compressor QPNC 10

  • Page 1: Table Of Contents

    ENGLISH Code 2200780113 Edit. 10/2014 INSTRUCTION AND MAINTENANCE MANUAL DRYERS QPNC 10 to QPNC 50 READ THIS MANUAL CAREFULLY BEFORE CARRYING OUT ANY OPERATIONS ON THE DRYER. CONTENTS PART A: INFORMATION FOR THE USER 11.0 UNPACKING 1.0 GENERAL CHARACTERISTICS 12.0 INSTALLATION 2.0 INTENDED USE...

  • Page 2: General Characteristics

    ENGLISH CHARACTERISTICS AND SAFETY PRECAUTIONS BEFORE REMOVING THE PROTECTIVE GUARDS TO CARRY OUT ANY MAINTENANCE ON THE MACHINE, SWITCH OFF THE ELECTRIC POWER SUPPLY AND DISCHARGE THE RESIDUAL PRESSURE INSIDE THE UNIT. ALL WORK ON THE ELECTRIC PLANT, HOWEVER SLIGHT, MUST BE CARRIED OUT BY PROFESSIONALLY SKILLED PERSONNEL. The manufacturer does not accept responsibility for damage caused as a result of negligence of failure to abide by the instructions given above.

  • Page 3: General Safety Standards

    ENGLISH 4.0 GENERAL SAFETY STANDARD The appliance may be used only by specially trained and authorized personnel. Any tampering with the machine or alterations not approved beforehand by the Manufacturer relieve the latter of responsibility for any damage resulting from the above actions. The removal of or tampering with the safety devices constitutes a violation of the European Standards on safety.

  • Page 4: Position Of Plates

    Ref.1 - Spare plate Code 1079 9926 55 FIG. 4 FIG. 5 GROSS WEIGHT MODD. lb. (Kg.) 57,3 (26) QPNC 10 59,5 (27) QPNC 15 1079 9926 55 70,5 (32) QPNC 25 75,0 (34) QPNC 35...

  • Page 5: Dimensions And Technical Data

    13.0 DIMENSIONS AND TECHNICAL DATA AIR INLET CONDENSATE DRAINING AIR OUTLET ELECTRICAL CABLE TYPE Refrigerant gas in (mm) in (mm) in (mm) QPNC 10 13,78 (350) 20,09 (510) 19,05 (484) R-134a 1300 QPNC 15 13,78 (350) 20,09 (510) 19,05 (484) According to ISO 817...

  • Page 6: Machine Illustration

    R134a HP (W) HP (W) HP (W) lb. (Kg.) V230/115-60Hz V230-60Hz V115-60Hz V230-60Hz V115-60Hz V230-60Hz V115-60Hz QPNC 10 41,9 (19) 0,397 (0,180) 0,161 (120) 0,164 (122) 0,040 (30) 0,040 (30) 0,201 (150) 0,204 (152) 232 (16) QPNC 15 44,1 (20)

  • Page 7: Partial Routine Maintenance

    ENGLISH 15.0 PARTIAL ROUTINE MAINTENANCE BEFORE CARRYING OUT ANY MAINTENANCE JOBS IT IS OBLIGATORY TO STOP THE MACHINE AND DISCONNECT IT FROM THE POWER MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION NETWORK. 15.1 MAINTENANCE SCHEDULE These maintenance intervals are recommended for work environments that are not dusty and are will ventilated. For particularly dusty environments, double the frequency of controls.

  • Page 8: Trouble-Shooting And Emergency Remedies

    ENGLISH 15.3 CLEANING THE CONDENSER (Fig. 10) The condenser must be cleaned every month. Proceed as follows: - Switch off the machine. Turn the switch in position STOP Ref. 3 Fig. 10 - Turn on the supply automatic differential switch Ref. 4 Fig. 10 - Remove the panels Ref.
  • Page 9 ENGLISH 17.1 DIGITAL CONTROL ALARMS N.B. OPERATIONS MARKED  MUST BE CARRIED OUT BY PROFESSIONALLY SKILLED PERSONNEL APPROVED THE MANUFACTURER DISPLAY FLASHING WARNING NOTES Possible root causes Observations Dryer is working OK Warning icon NOT Fan control probe failed  replace probe fashing, label P1 flashing Warning icon NOT PDP Temp probe failed...
  • Page 10 ENGLISH SE ALARM After 2000Hrs, the controller will issue a “SE” warning. This is the maintenance due warning. How to reset the maintenance warning: follow steps 1 to 6 10 - Edition 10/2014 Cod. 2200780113 01 -...

  • Page 11: Starting Up

    ENGLISH PART “B” THIS PART “B” OF THE INSTRUCTIONS MANUAL IS RESERVED FOR PROFESSIONALLY SKILLED PERSONNEL APPROVED THE MANUFACTURER. 18.0 STARTING UP BEFORE CARRYING OUT ANYOPERATION ON THE MACHINE, ENSURE THAT THE ELECTRIC POWER SUPPLY HAS BEEN DISCONNECTED 18.1 PRELIMINARY CONTROLS Before starting the dryer, check: - The correct connection to the compressed air piping: remember to remove eventual caps on the drier inlet and outlet.
  • Page 12 ENGLISH 12 - Edition 10/2014 Cod. 2200780113 01 -...

This manual is also suitable for:

Qpnc 15Qpnc 25Qpnc 35Qpnc 50

Table of Contents