UK25LTDST-UK/English.qx
6/22/99 8:41 AM
Temporary Mobile Set-Up
Temporary
Temporary Mobile Operation
Mobile Set-Up
For temporary mobile operation you may want to
purchase an optional cigarette lighter adapter
from your COBRA dealer.This adapter and a mag-
netic mount antenna allow you to "install" your
transceiver quickly for temporary use.
24
Page 24
Home And Office Set-Up
Base Station Operation
(From 220/240V AC Domestic Current)
To operate your transceiver from home or office
you will need a 13.8 volt DC Power Pack rated at a
minimum of 2 amps, and a properly installed base
station antenna.
Connect the red (+) and black (-)
1
leads of the transceiver to the corresponding
terminals of the power pack.
2
Plug power cable into back of unit mar ked
"Power" . Be sure to observe polarity markings.
Connect properly installed and matched base
3
station antenna.
Base Station
Operation
(From 220/240V
AC Domestic
Current)
Warning!
Do not attempt to operate this
transceiver by connecting it
directly to 220/240 V AC.
25