Table of Contents
Advertisement
UK25LTDST-UK/English.qx
6/22/99 8:41 AM
Operation
NB/ANL, ANL,
NB/ANL,ANL, Off Switch
OFF (Noise
B l a n k e r, Automatic
Noise Limiter
Switch
Note
1
When switched to NB/ANL position the RF
The RF noise blanker is very
Noise Blanker and Automatic Noise Limiter is
effective in reducing repetitive
activated, providing increased noise filtration.
noises such as ignition interfer-
ence.
When switched to the ANL
2
Noise Limiter is activated. This helps reduce
noise created by the vehicle's electronics.
When switched to
Blanking and the Automatic Noise Limiting
Filtration will be turned off.
14
Page 14
the Automatic
OFF position Noise
Bright/Mid/Dim Switch
Switch to
BRT, MID or DIM to control bright-
1
ness of the channel indicator and multi-func-
tion meter for day or nighttime driving.
RF Gain Control
The RF Gain is used to optimize reception in
strong or weak signal areas.
1
Rotate the
RF Gain knob anticlockwise to
reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
Operation
Bright/Mid/Dim
Switch
RF Gain Control
Note
The RF Gain is used to optimiz e
reception in weak signal areas.
15
Advertisement
Table of Contents
