Shelf Runners; Baking Tray, Universal Tray And Rack With Anti-Tip Safety Notches - Miele TX3587 Operating And Installation Instructions

Shelf runners

Shelf runners for accessories (trays,
racks, FlexiClip telescopic runners etc.)
are fitted on either side of the oven
cavity for shelf levels ‡.
The shelf level numbers are indicated
on the front of the oven frame.
Each shelf runner has two rails:
– Accessories are inserted between
the two shelf runners.
– FlexiClip telescopic runners (if
available) are fitted to the bottom rail
of each shelf runner.
The shelf runners can be removed for
cleaning purposes (See "Cleaning and
care").
Baking tray, universal tray and rack
with anti-tip safety notches
Baking tray HBB 71:
Universal tray HUBB 71:
Rack HBBR 71:
Insert these accessories into the shelf
runners between the two rails of a shelf
level.
Non-tip safety notches are located on
the accessories which prevent the trays
being pulled out completely when you
only wish to pull them out partially. They
also prevent trays from tipping.
– The baking tray and universal tray
have non-tip safety notches half-way
along the short sides.
– The rack has non-tip safety notches
towards the rear of the short sides.
Always place the rack in the shelf
runners with the loading surface in
the lower position and the non-tip
safety notches towards the back.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf runner and the rack
will sit on top of it.
These accessories have been treated
with PerfectClean enamel.
Features
21