Menu Description - ZALMAN ZM-VE300 Quick Manual

11. Menu Description

■ To use Virtual ODD, iso file must be located in the "_iso" folder of device.
■ Enter into or free from menu if Jog switch is pressed for 3seconds.
■ If backup button is pressed on Menu, it moves to 1 upper layer.
- Except Menu, Backup button is used for its original function, Data Backup.
■ External HDD or CD-ROM may not be recognized according to current mode states.
(1) Main Menu
Mode Select
Setting
Information
USB Connect
Advanced
Exit
(2) Mode Select ("ν"is shown in selected mode)
Dual Mode
ODD Mode
HDD Mode
(3) Setting
LCD Bright
Idle Bright
Standby time
Load Default
(4) Information
S.M.A.R.T
HDD Model
HDD Serial
Firmware Ver.
USB Speed
USB Input Volt
(5) S.M.A.R.T
HDD Temp.
HDD Health
> Device Mode setting
> Setting LCD brightness or Sleep Mode time
> Check HDD information and firmware information
> Setting USB connection
> Setting Virtual HDD mounting
Menu Exit
Both of external HDD and CD-ROM are recognized
ExternalCD-ROM is recognized. (Useful when OS installing)
External HDD is recognized.
(Useful when connecting other devices except PC)
> AdjustLCD backlight brightness
> Adjust LCD backlight brightness in Sleep Mode
> Sleep Mode time setting
Return to default value
> Hard disk SMART information
> Display Hard disk model name
> Display Hard disk serial number
> Display device firmware version
> Display current PC connection
(USB2.0: Hi-speed, USB3.0: Super-speed)
> Display the lowest Input Voltage (V) from USB port after
connecting with PC
Display current Input Voltage (V)
> Display HDD temperature
> Display HDD health info (Good, Warning, Bad)
- If Warning or Bad is shown, please check HDD carefully after
backup date.
.COM
4