Advertisement
5. Mounting a 2.5" HDD
1
3
6. Connect to / Disconnect from PC
Connect device to PC's USB port using enclosed USB cable.
When disconnecting, please use "Hardware Safety Removal" from the system tray.
7. Button description
1. When pressing "Backup" button, it runs backup application.
2. When pressing "Backup" button more than 3 sec, it runs "Safety Removal."
3. If data is not accessed for 10 minutes, it goes into "Sleep mode".
4. When device is connected to USB2.0 PC, Red LED is shown.
5. When device is connected to USB3.0 PC, Blue LED is shown.
WWW.ZALMAN.COM
USB3.0 Port
2
4
LED Indicator
Backup Button
2
Advertisement
