Advertisement
All manuals and user guides at all-guides.com
Caution
▶ This device supports Hot Swap using e-SATA. To use Hot Swap function, please
check in advance if PC motherboard supports Hot Swap function.
▶ Connect e-SATA cable first, then USB cable.(When removing, use reverse order.)
▶ If cable is unplugged with force while operating, it may cause fatal error to the
system and device.
8. Introduction
(1) Using Jog Switch
To previous file
Select file
To next file
(2) Menu Navigation
Begin of List
Dual Mode
:
▶ *.iso
Folder
▶ *.iso
:
:
:
Folder
▶ *.iso
:
▶ *.iso
:
▶ *.iso
End of List
HDD Model
Firmware Version
Caution
To use Virtual ODD, iso file must be located in the "_iso" folder of device.
.COM
Desired mode is set after waiting 3 seconds
HDD Mode
HDD S/N
Move to previously selected iso file
ODD Mode
VE200SE S/N
4
Advertisement
