Steam Ironing; Anti-Scale System - Morphy Richards Steam Generator ironing system User Manual

RN42271MUK Rev5:RN42271MUK Rev5 20/11/2009 15:43 Page 6
4 When the required
temperature is reached, the
temperature indicator light
on the iron goes off. The
iron is ready to use.
It is always a good idea to
begin with 'cool' fabrics
and work up to higher
settings.
An iron heats up quicker
than it cools down so you'll
save time and electricity.

STEAM IRONING

The spray unit
(certain models only)
The spray unit can be used
at any time and does not
affect any product settings.
Filling the spray
unit
The spray feature ‰ is
lightly secured to the
handle. To fill the water
tank, pull the spray unit
forward using the two
moulded lugs provided.
Remove the spray bottle Â
from the base of the pump
and fill with water to the
'MAX' mark.
Re-fit the spray bottle,
making sure the arrows
(printed black) are in line.
To replace the
spray unit
Align the spray unit with the
front of the iron.
Fit the bottom location leg
into the slot at the front of
the handle. Pivot the spray
unit towards the iron,
making sure it clips firmly in
place.
ANTI-SCALE
SYSTEM
The anti-scale cartridge is
designed to reduce the
build-up of limescale which
6 UK Helpline 0844 871 0953
occurs during steam
ironing. This will prolong
the working life of your iron.
However, please note that
the anti-scale cartridge will
not completely stop the
natural process of
limescale build-up.
Replacing
anti-scale cartridge
How often you need to
replace the anti-scale
cartridge depends on how
often you use your iron with
its steam functions and
how 'hard' your water
supply is. Water hardness
varies greatly from one area
to another. For advice on
the relative hardness of
your water, contact your
local water supplier.
If, on average, you spend 2
hours per week ironing,
then we suggest you refill
your anti-scale cartridge as
shown in the table below. If
you iron more or less
frequently, then you should
alter the interval between
refills accordingly.
Water
Soft Medium Hard
hardness
Refill interval
6 3
(months)
Replacement
anti-scale refills
To obtain replacement anti-
scale refills, telephone our
spares number on: 0844
873 0719.
• If a new cartridge is not
available, you may continue
operating the appliance but
scale will build up in the
system. Replace the used
cartridge as soon as
possible.
1 Disconnect the appliance
from the mains outlet.
2
Slide out the tank and
remove the antiscale
cartridge E.
3
Pull the plate from the end
of the cartridge F.
Replacement Parts 0844 873 0719
www.morphyrichards.com
4 Remove the foam pad G
and slide out the spent
antiscale sleeve H.
5 Place the refill into the
cartridge, reposition the
foam pad and clip the plate
onto the cartridge, making
sure it locks in position H.
FEATURES OF
YOUR STEAM
GENERATOR
Temperature
indicator light
The indicator light shows
that the iron is warming up.
When the required
temperature is reached, the
light will go out and will
cycle on-off during
operation.
E
1 /
1
2
H
G
F
Ireland Helpline 1800 409 119