Before Use - Morphy Richards Steam Generator ironing system User Manual

RN42271MUK Rev5:RN42271MUK Rev5 20/11/2009 15:43 Page 4
COMPONENTS OF YOUR STEAM GENERATOR
¤
fl
‡
‰
certain models only
‰
Â
certain models only
UK Helpline 0844 871 0953
4
⁄
›
‹
COMPONENTS OF
YOUR STEAM
GENERATOR
Iron unit
⁄ Steam trigger
¤ Temperature control dial
‹ Soleplate
› Temperature indicator light
fi Supply cord from base unit
Base unit
fl Anti-scale cartridge
‡ Water tank
· Power cord
‚ Power switch with indicator light
„ Boiler temperature indicator light
‰ Spray unit (certain models only)
 Spray bottle (20ml)
(certain models only)
Replacement Parts 0844 873 0719
fi
‚
·
LOCATION
Locate the steam generator
horizontally on the iron rest plate
of your ironing board (if large
enough) or on a heat resistant
stand at the same height as
your ironing board or below it.
Always ensure the generator is
on a firm surface when ironing.
WARNING: Do not use the
product on a surface which
could be damaged by heat or
steam such as a worktop or a
polished wood surface.
If in doubt, contact Morphy
Richards.

BEFORE USE

Remove any protective sticker
from the soleplate and the base
unit, if any.
Unwind and straighten the
power cord · and supply cord
fi.
Slide out the water tank ‡ and
fill (see filling instructions).
Textiles and clothes are
supposed to carry ironing
instructions. If they don't, you
should follow the fabric guide on
page 3, but be sure to test the
temperature by ironing the hem
of the garment or similar area
first.
If you turn the control dial down
from a hot setting to a cooler
setting, wait until the iron
temperature has stabilised
before you continue ironing.
Ireland Helpline 1800 409 119
„
I
O