Electrical Requirements; Temperature Guide - Morphy Richards Steam Generator ironing system User Manual

RN42271MUK Rev5:RN42271MUK Rev5 20/11/2009 15:43 Page 3
• When ironing is complete,
remove the plug from the
socket, empty any remaining
water from the tank, and allow
to cool before storage.
• If you drop or severely knock
your steam generator, this could
cause internal damage even if
the outside appears alright.
Have it checked by a qualified
electrician.
• The temperature of accessible
surfaces may be high when the
appliance is operating.
WARNING: Do not use the
product on a surface which
could be damaged by heat or
steam such as a worktop or a
polished wood surface.
If in doubt, contact Morphy
Richards.
INSTRUCTIONS FOR USE

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
Do not iron
Control knob
at all
positions
Fabric
Ironing
Steaming
Without steam
For details of other Morphy Richards products, please see our website:
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
WARNING: A damaged or
severed mains cable fitted
with a plug should never be
connected to the mains
supply. It must be destroyed,
as a damaged cable becomes
hazardous if connected to a
power socket.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance
must be earthed.
(120°C Max) Cool (160°C Max) Warm
Nylon, Acetates Wool, Polyester
e.g. Acrilan mixtures e.g.
Courtelle, Orlon Polyester/Cotton
Triacetates, e.g.
Tricel/Polyester
Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
(210°C Max) Hot
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Dry ironing
3